Dryer Vent Cleaning
Professional Dryer Vent Cleaning
Are you seeing the laundry take more time to dry? Do you need to run the load two times? Do you find the top of your dryer warm at the point of contact after each use? Instead of a malfunctioning dryer, ductwork that has become blocked could be the cause.
The dryer lint filter, which is removable, is able to capture the bulk of the line when it moves through the washing machine. But, bits of lint may pass through the filter and end up in the crevices of the dryer’s duct.
If there’s an accumulation of lint, airflow becomes limited, which could cause excessive heat. If the air inside the duct heats up enough, it will cause the appearance of a fire in the dryer and could cause the lint to ignite.
How do you clean a dryer? Vent Duct
Instead of hiring a professional cleaning company, a DIY job will save you money. Include a vacuum cleaner with screwdrivers and dryer vent brushes kit along with a long hose connection and UL-certified metallic foil tape for your ducts.
Reasons Dryer Vent Cleaning is Vital
Instead of hiring a pro cleaning service, DIY will save you money. Include a vacuum cleaner with screwdrivers and dryer vent cleaning kit and a long hose attachment and UL-certified aluminum foil for duct tape.
Step one:
The first thing to find out where the duct’s beginning and where it ends. The majority of dryers feature a short 4-inch diameter exhaust on the back, which connects to the aluminum bend. Air escapes your home and passes through these pipes.
Step two:
Remove your dryer from the circuit by disconnecting an outlet power supply, or switching off the propane or gasoline valve. You can then take the dryer vent pipe out of the exhaust and get rid of any clamps or metal tape. Be cautious when you disconnect the power and gas line in the dryer should not be disturbed the dryer if it is one that is powered by natural gas. Gas leaks can be very serious If you’re not sure of the process, consult an expert.
Step three:
Remove the vent pipe of the wall-mounted duct. Remove this dust shield from its point of exit and let it easy for ductwork access. A dryer vent kit has segments that are flexible as well as the lint brush can connect depending on the length of the dryer vents. To effectively clean the dryer vent duct you will require specific brushes.
Step four:
Install the venting brush in the ductwork and turn it counter-clockwise as you push it to the maximum as it is possible through the dryer’s drains. If you require more length to get to the top of the duct you can add more sections. The brush will begin to loosen.
Step Five:
Get rid of all the lint out of the ductwork using a vacuum. (Heads to the top: it could be quite a bit!) Make use of the hose attachment to clean the holes on the trap housing as well as both ends. As long as there isn’t any visible lint to be removed. Repeat the process as necessary.
Quick Service On Emergency Call - 24/7
We’re Obsessed with Carpet Cleaning New Jersey homes & business. We Are Trusted by Thousands of Clients.
Professional, Quality Cleaning Because Quality Is Necessary